Maintenance and troubleshooting of drug cartoning machine: answering common questions

Drug cartoning machine is a very important equipment in drug production line, which is responsible for drug cartoning. In order to ensure the normal operation of drug cartoning machine and prolong its service life, we need to carry out maintenance and deal with faults in time. This paper will introduce the maintenance and common fault handling methods of drug cartoning machine.

I. Maintenance

Cleaning and disinfection of pharmaceutical industry is a high standard cleaning industry, so the drug cartoning machine needs to be cleaned and disinfected regularly. The cleaning method can be to use gauze, brush, vacuum cleaner and other tools to remove dust and debris from the machine, and then scrub and disinfect it with detergent.

Lubrication For some moving parts of drug cartoning machine, lubrication is needed to reduce friction and wear. Before lubrication, it is necessary to remove dirt and then lubricate with lubricating oil or grease.

Check every part of the drug cartoning machine regularly to see if it is worn, loose or deformed, and replace or repair the faulty parts in time.

Keep the environment around the machine clean and tidy, and keep the environment around the drug cartoning machine clean and tidy, so as to prevent impurities from entering the machine and affecting the normal operation of the machine.

Second, the common fault handling methods

The machine can't start. Check whether the power supply is connected normally and whether the fuse is blown. If there is nothing wrong with the power supply and fuse, it may be that the circuit board has failed, and maintenance personnel need to be contacted for repair.

Abnormal feeding of the carton Check whether the feeding device is blocked or loose. If it is blocked, remove the blockage; If it is loose, readjust the feeding device.

The carton cover is not firm. Check whether the cover device is loose or worn. If it is loose, it needs to be fastened; If it is worn, the sealing device needs to be replaced.

Abnormal packaging of products may be caused by improper adjustment of the machine, so it is necessary to adjust the parameters and settings of the cartoning machine to obtain the correct packaging effect.

If the noise of the machine is too high, check whether the machine is installed smoothly. If it is not stable, it needs to be reinstalled. If the installation is smooth but the noise is still loud, it may be that the internal parts of the machine are damaged, and maintenance personnel need to be contacted for repair.

The tray is out of paper. Check whether there is enough paper in the tray. If not, add paper in time. If there is enough paper, but you are still prompted to be short of paper, it may be that the sensor is faulty and needs to be repaired or replaced.

When dealing with faults, it is necessary to eliminate possible simple problems, such as checking power supply, circuit, switch and sensor, and then thoroughly investigate complex faults. If you encounter an unsolvable fault or need to replace parts, you should contact the supplier or maintenance personnel in time for maintenance.

In a word, the maintenance and troubleshooting of drug cartoning machine are very important to ensure the normal operation of drug production line. Only by regular maintenance and timely handling of faults can we ensure the stability and efficiency of the drug cartoning machine.